JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

Ikke tilgængelig

Video

Tilbage til Outlet.

Har du brug for hjælp med din JBL BAR 9.1 True Wireless Surround with Dolby Atmos®? Se vores Support.

Ikke tilgængelig

Video

JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

Ultimativ 3D-lydoplevelse

Opgradér din film- eller spiloplevelse fra almindelig til ekstraordinær med indbygget Dolby Atmos®, DTS:X™ og fire suveræne højttalere, som sender lyden op til loftet og ned igen for en fantastisk og ægte 3D-oplevelse.

Rigtig surroundsound på et sekund

Nyd øjeblikkeligt en ægte, filmisk 9.1-surroundoplevelse. Du skal blot placere de to aftagelige surroundhøjttalere bag dig. Ingen ekstra ledninger, ingen ekstra strømforbindelser, så intet ekstra besvær.

Aftagelige højttalere, der kan placeres hvor som helst

Indbyggede batterier sætter lyden fri. Placer de to aftagelige surroundhøjttalere hvor som helst i lokalet for at nyde en utrolig lydoplevelse. Efter 10 timers afspilning skal du blot "docke" dem til soundbaren for at genoplade.

Funktioner

820W Udgangseffekt

Med 820 watt systemudgangseffekt vil du opleve dine film, spil og musik som aldrig før. Lad den fordybende, kraftfulde lyd tage din film- eller spiloplevelse til det næste niveau

Kraftfuld bas

Den stærke, præcise bas fra den mægtige 10'' trådløse subwoofer bringer ekstra energi til actionfilm og ekstra følelse til din musik.

Ultra HD 4K-gennemgang med Dolby Vision™

Fantastisk 4K-videoopløsning fortjener fantastisk lyd. Når JBL Bar 9.1-soundbaren parres med dit TV, opstår den ultimative dynamiske duo.

Chromecast og Airplay 2 indbygget

Indbygget wi-fi og kompatibilitet med Chromecast og Airplay 2 betyder, at du trådløst kan afspille din yndlingsmusik fra nettet med suveræn klarhed - og et enkelt fingertryk.

Stream det hele

Ikke i humør til film? Intet problem. Med JBL Bar 9.1 soundbar kan du også få glæde af trådløs musikafspilning via Bluetooth fra din mobilenhed eller tablet.

Detaljer & Downloads

Item# JBLBAR913DBLKEP

Beskrivelse

"- Med 3D-surroundsound er det som at være der selv "

JBL Bar 9.1 soundbar bringer lydoplevelsen fra en biograf ind i dit hjem med to aftagelige surroundhøjttalere og den ekstra energi fra Dolby Atmos® og DTS: X ™ 3D-lyd. Med 820 watt total systemeffekt kan du nyde enhver Oscar-værdig præstation gennem kraftfuld, krystalklar lyd. Skru op for subwooferen på 10 tommer for pulserende bas, eller skru ned for den, og slap af med trådløs musikafspilning via Chromecast og AirPlay. Fordyb dig i det seneste filmhit, eller genoplev din yndlingsfilm eller sportsscene. Den mest utrolige hjemmebiograf-lydoplevelse er her.

Specifikationer

Lydsystem: 5.1.4 kanaler
Strømforsyning: 100 - 240 V AC, ~ 50/60 Hz
Batterigenopladningstid: 3 timer
Samlet højttalerudgang (maks. ved THD 1 %): 820 W
Soundbars udgangseﬀekt (maks. ved THD 1 %): 400 W
Surround-højttalers udgangseﬀekt (maks. ved THD 1 %): 2 x 60 W
Subwoofers udgangseﬀekt (Maks. @THD 1%): 300 W
Soundbar-enheder: 4 × racetrack-enheder + 2 × opadvendte fuldskala-enheder + 3 × 0.75” (20mm) diskanter
Surround-enheder (pr. styk): opadvendte fuldskala-enheder + 0.75” (20mm) diskanter
Subwoofer-enhed: 10”
Driftstemperatur: 0 °C - 45 °C
Tid til standby: <10minutter

Lydspecifikationer

HDMI-videoindgange: 1
HDMI-videoudgang med eARC (enhanced Audio Return Channel): 1
HDMI HDCP-version: 2.3
Maks. SPL: 103dB
Frekvensområde: 34Hz~20KHz
Audio inputs: 1 Optical, Bluetooth, Chromecast, AirPlay2, USB

Mål

884 x 62 x 120 mm (soundbar);

173 x 60 x 120 mm (aftagelig surroundhøjttaler pr. styk)

305 x 440 x 305 mm (subwoofer)

3,64 kg/ 8,0 lb (soundbar);

0,72 kg x 2 / 1,6 lb x2 (aftagelig surround.højttaler);

11,10 kg/ 24,5 lb (subwoofer)

Specifikationer, styring og tilslutning

USB-port: Type A
USB-rating: 5 V/ 500 mA
Understøttede flformater: MP3
MP3 codec: MPEG 1 lag 2/3, MPEG 2 lag 3, MPEG 2,5 lag 3
MP3 sampling-rate: 16 KHz - 48 KHz
MP3 bitrate: 80 kbps - 320 kbps
Bluetooth-version: 4.2
Bluetooth-profl: A2DP V1.2, AVRCP V1.5
Modulationstype: GFSK, π/4 DQPSK, 8DPSK
2,4 G wi-f-frekvensområde: 2412 - 2472MHz (2,4 GHz ISM-bånd, USA 11 kanaler, Europa og andre steder 13 kanaler)
Modulationstype: DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
5G maks. wi-f-sendekapacitet: 22 dBm (EIRP)
Modulationstype: QPSK, BPSK, 16QAM, 64QAM, 256QAM
5G maks. sendekapacitet: 13 dBm (EIRP)
Modulationstype: QPSK

Det er der i æsken?

1 soundbar
2 aftagelige trådløse surroundhøjttalere
1 trådløs subwoofer
Fjernbetjening med 2 batterier
Strømkabler (op til 8 stk. afhængigt af områdets konfiguration)
1 HDMI-kabel
2 L-formede vægbeslag (soundbar) + 2 U-formede vægbeslag (til surroundhøjtalere) sæt med skruer
Lynguide
Garantikort
Sikkerhedsark
Kun for visse regioner

Dokumenter og downloads

Lynvejledning (flersproget)

Konformitetserklæring (EU)

JBL Global Warranty Card

Firmware Update JBL Bar 9.1 TWS version 22.01.31.80 (Global Version)

Datablad (Engelsk)

Betjeningsvejledning (Engelsk)

Datablad (Dansk)

Betjeningsvejledning (Dansk)

Bedømmelser og Q&A

Kunde-anmeldelser

Rated 1 out of 5 by Alanm829 from Calibration Issues The speakers sound good but the problem I am having is the calibration issues. This is my 3rd set and all have the same problem. The first and second set worked perfectly until I did the firmware update. The third set I received directly from JBL already had the current update already installed so I was never able to complete the calibration process. Apparently the most current firmware (20371180) is giving some people issues with the calibration process. I was told that there is a new update that will be released. This issues has been going on since October of last year!! Why is it taking so long for this update???? Very unhappy.

Date published: 2021-04-15

Rated 4 out of 5 by RockyKarthik from Great speaker. The best so far by JBL. I switched from a 3.1 channel soundbar to this 9.1 channel one. The sound quality is excellent. It totally transformed my living room into a movie theatre. The detachable speakers offer surround sound which totally offers a different level of experience. Some cons: - Sometimes I hear a lot of disturbance from the detachable speakers - the audio quality is excellent but the maximum Volume is not sufficient for me. Max volume is 32. I would’ve been happy if the max volume is at least 40 or 50. When at high Bass and high Atmos, the voices and lyrics are not clearly audible. Other than that this is a fantastic speaker and gives you a mind blowing experience.

Date published: 2020-06-19

Rated 3 out of 5 by Anonymous from Great Sound, Trouble with Satellite Speakers Speaker/soundbar sounds great, but the satellite speakers have had issues. 1. The left side speaker does not charge when seated in the sound bar. No matter what I did it would not charge. When all the way seated, it is not flush, clearly an issue 2. They tend to not stay all the way seated into the sound bar and "drop" down a bit but do not fall out JBL since told me to go back to company for solution and they "do not have any in stock and don't expect to" so I am stuck with either dealing with one speaker not charging or just returning and everyone else is sold out as well. So, I guess I will just go with another product.

Date published: 2021-03-20

Rated 5 out of 5 by XBTV from Very happy with this soundbar for eARC ATMOS needs After reading everything carefully and learning all the features I am VERY happy with the sound bar. Some things to note for first timers. If your TV has ATMOS and eARC make sure to set your TV to "PASSTHROUGH". It will send the 5.1 ATMOS single to the bar and the bar will display ATMOS for apps such as NETFLIX and D+ without having to use PCM. (PCM wouldn't cut it for me, passthrough worked like a charm, but be sure you have eARC or you will most likely have to use PCM.). Also using passthrough cleared up any sync issues. If you are having problems with getting to calibration mode 1 after completing mode 2.. Turn off the speaker then turn back on and you can reconfigure Calibration 1. To turn off Smart Mode (which will output general sound to all speakers when no surround is dected) Hold down the Mute button for 3 seconds.. LET GO OF THE MUTE BUTTON the press the volume up.. You will see a Display stating "SMART MODE OFF".. It was tricky to figure out cause I'd hold down mute and keep it pressed while I pressed the volume up. The sound quality is amazing and the sub is very powerful. The fact I can keep my rears on the bar until ready to use without any wires is just Phenomenal for my home situation. I'm very happy with the JBL 9.1 and look forward to more improvements from firmware updates.. Hopefully EQ settings for front, center, rear via Phone App or something.

Date published: 2020-08-27

Rated 5 out of 5 by Jetc33 from Awesome Sound I have become a fan favorite of JBL products. I have bought a few portable speakers from my phone carrier but I am a satisfied customer. When given the opportunity for jbl backstage this has only made my experience better. My 16yr old son helped me put it together and WE ARE PLEASED. He first tried it with his PS4 and the sound quality is just crisp clean all around AWESOME. We then listened to the music quality via bluetooth.. another winner. The base sound was not too overwhelming just all round great beats. The tv sound quality is also great...now my mom doesn't have to turn up the tv too loud...Everything is Crystal Clear. We are more than Satisfied. Another AWESOME piece of equipment to have.

Date published: 2020-06-24

Bar 9.1 True Wireless Surround Reviews - page 2

Spørgsmål og svar

Did anyone have any luck using the Soundbar with a Fire TV Cube (2nd Gen) ? All the apps (Netflix, Prime, Disney) let me select Atmos sound but the soundbar only says "Dolby Surround". No luck getting help from JBL .what is the solution?

Asked by: Jack74

I was able to get Dolby atmos on my direct cube but you need to make sure you have the newest version 2020.  The first cube 2019 does not support Dolby atmos.  I found that not all titles were supported with Dolby atmos by Amazon if it doesn’t say Dolby atmos on the actual screen when selecting movie it will most likely play in Dolby surround.  For this reason I returned the Amazon fire tv cube and got the roku ultra newest version and it upgrades everything to Dolby Atmos!  Even the menu screens registers Dolby Atmos.    I also tried the the Apple TV 4K and that had even less that would play in Dolby Atmos none of my Amazon prime videos or Vudo UHD would play Dolby Atmos.  As soon as I switched back to the Roku ultra 2020 all the videos I thought should be Dolby Atmos were across all play forms.  This works for me because Roku supports airplay so I don’t need the Apple TV.  

Answered by: Sethomatic32

Date published: 2022-03-14

Does the JBL 9.1 display Dolby Atmos when playing Dolby Atmos?? I have directly connected ShieldTV and FireTV to it (over HDMI) and am passing Dolby Atmos titles to JBL 9.1 but it says Dolby Surround on the soundbar. It says that for ALL Dolby signals. 

Asked by: Sharky77uk

Passthrough Passthrough Passthrough .. I couldn't get D+ on my LG app to get atmos.. I put on PASSTHROUGH on TV.. ATMOS LISTED ON SOUNDBAR! TV must have HDMI eARC 2.1

Answered by: XBTV

Date published: 2021-06-06

Updated software and now noticeably quieter. Voices were clear at lower volume levels and now have to increase volume so everything is loud just to hear speaking.

Asked by: MikeK

Mike you are not the only one, I am having to increase the bass from 3/5 previously to 5/5. volume was 9 before now im going up to 13 depending on the source. I have a feeling that the update has limited the power of the system some how. I hope they resolve this

Answered by: Tech87

Date published: 2021-06-06

Do the side caps for both the soundbar & read speakers come with the UK version? In the specification & manual it states "some regions only"

Asked by: Lees

Yes they do, although the "UK version" I ordered came with two EU power cords, not UK ones!

Answered by: Fraser

Date published: 2021-06-06

I have an 86" LG 86SM9070PUA that has eARC HDMI 2.1 on the #2 input. I have my JBL 9.1 connected correctly, however if I play something from Disney+ app that is supposed to have Dolby Atmos? It doesn't display as such, it only shows "Dolby Surround"

Asked by: XBTV

This a known issue with Disney+, at the very least in certain territories. Outside of its content list it is frankly not a very good app. Add this issue to lots of fake Dolby Vision shows and films. Basically it’s Disney lying to customers and not delivering on its promises to save money, unfortunately 

Answered by: Andyyyy

Date published: 2021-11-19

Does the sound bar have any selectable EQ settings to boost center/voice or treble/bass levels?

Asked by: Dude8

Based on reviews, the bar has bass, rear, and height adjustments, but no center/treble adjustments. You can turn on a "standard" EQ preset that is supposed to be better for stuff like news, but by default it automatically switches between Movie and Music modes.

Answered by: JoinTheBattle

Date published: 2021-06-06

Bought this yesterday and I can't adjust the rear speaker volume when I press it says "NOT SUPPORTED" speakers are working fine and it's detached as well.

Asked by: Chath

Unfortunately you have a defective peice. The charging case of your detachable speaker is malfunctioning which is causing the 'Not Supported' error, the case needs to be replaced. This is been noted in the March 2021 manufactured models mostly. JBL knows this.

Answered by: Jt261

Date published: 2021-06-06

Calibration keeps coming up as retry?

Asked by: Beman

Ethernet between JBL and router / modem... the JBL SB behaves much better with a wired connection. THIS IS VIP: As the calibration is wireless ie. between SB and rear speakers make sure you disable wifi from  PC, mobile, tablets etc if not remove them from the area between SB and calibration placement (see manual).  Thats what JBL omit from their manual yet its so logical... 

Answered by: CTaztec

Date published: 2021-06-06

Bar 9.1 True Wireless Surround Questions - page 2

Support

1/2 2/2