Køb nu
JBL Endurance RUNBT
Send til
,
Betaling
Gemt slutter om
Der er en nyere version af denne vare:
Please click PERSONALIZE to get started or select a design
Fliphook™
Med det fleksible tovejs design kan du bære hovedtelefonerne enten i eller bag ørerne.
Gør aldrig ondt. Falder aldrig ud.
Med TwistLock™- og FlexSoft™-teknologierne er disse hovedtelefoner lette og ergonomiske med sikker pasform, uanset hvordan du træner.
Funktioner
Svedtætte
Udformet til at modstå din mest krævende træning - både inde og ude under alle vejrforhold.
6 timers trådløs afspilning
Med Bluetooth® kan du trådløst afspille musik i høj kvalitet uden at bekymre dig om rodede ledninger, der forstyrrer din træning.
Håndfri opkald
Den integrerede et-knaps-fjernbetjening med mikrofon giver dig håndfri opkald, så du kan fokusere på din træning. Et dobbelttryk på knappen aktiverer Google Now eller Siri.
Magnetiske ørestykker
Magnetiske ørestykker giver nem kabelhåndtering, når hovedtelefonerne ikke er i brug.
Detaljer & Downloads
Item# JBLENDURRUNBTRED
Beskrivelse
Gør aldrig ondt og falder aldrig ud
Resultater er vigtige, og når du har de perfekte hovedtelefoner, kommer intet i vejen for dig og din træning. Med JBL Endurance RUNBT kan du afspille trådløst, så du får motivationen til at træne endnu hårdere med den kraftfulde JBL-lyd. Med deres FlipHook™-design tilpasser de sig i eller bag øret, så du får endnu mere komfort. Den komfortable kombination af FlexSoft™ ørepropper og TwistLock™ teknologi sikrer, at disse ørepropper med garanti aldrig vil gøre ondt eller falde ud. JBL Endurance RUNBT hovedtelefonerne er IPX5-svedtætte, så de følger dig hele vejen, uden at sved eller regn ødelægger din træning. JBL Endurance RUNBT har en afspilningstid på 6 timer og integreret mikrofon og fjernbetjening til håndfri håndtering af lyd og opkald. De magnetiske ørestykker fastgør dine Endurance RUNBT bekvemt omkring halsen, når de ikke er i brug. Nyd din træning!
Specifikationer
- Følsomhed
- 102dB SPL@1kHz/1mW
- Dynamisk frekvensområde
- 20Hz-20kHz
- Maks. SPL
- 15mW
- Impedans
- 16 ohm
Lydspecifikationer
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 102 dB
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 16 ohm
Mål
- Hovedtelefonernes kabel-længde (cm)
- 62
- Hovedtelefonernes kabel-længde (ft)
- 2.03
- Vægt (g)
- 19.7
- Vægt (oz)
- 0.69
Specifikationer, styring og tilslutning
- Bluetooth-profiler
- A2DP V1.2, AVRCP V1.5, HFP V1.5, HSP V1.2
- Bluetooth-frekvens
- 2.402 GHz - 2.48 GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK and 8DPSK
- Bluetooth sender-effekt
- 4dbm
Batteri
- Taletid (timer)
- 6
- Maksimal spilletid (timer)
- 6
Egenskaber
- Understøtter Siri, Google Now
- Ja
- Trådløse
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Genopladeligt batteri
- Ja
- Bluetooth
- Ja
Det er der i æsken?
- 1 ENDURANCE RUNBT
- 3 størrelser ørepropper
- 1 adapter
- 1 opladningskabel
- 1 garanti/advarsel
- 1 x lynguide/sikkerhedsark
Dokumenter og downloads
Bedømmelser og Q&A
Kunde-anmeldelser
Spørgsmål og svar
Does the magnet switch on when pulling apart and switch off when putting together?
The magnet on the earbuds of our JBL Endurance RunBT is simply for easy cable management when the unit is not in use.
Date published: 2021-06-06
Hello, My JBL endurance run bt has been working fine, but now for some reason no device can find the earplugs anymore in bluetooth. the light fliks between blue and red, but I cant find it in any bluetooth. Not on my phone or on anybody else`s phone.
We're sorry to hear about what happened. Please try to reset the earphones if this can help fix the problem:
Long press the Volume + and volume - for about 5 seconds. Now the unit has been reset.
If you need more help, please contact our local support in Norway for assistance: https://support.jbl.com/no/no/#contact
Date published: 2021-12-11
I had bought this earphone a while ago and all was working fine untill few days back it stopped working I thought it was discharged but then i kept it for charging and red light came on However after 3 hours of charging it still doesnt works
We would like to get more information to help you out, please contact us so we can assist you:https://bit.ly/3hzae85
Date published: 2021-06-06
I had my JBL Endurance RUNBT for a year now. Yesterday I put it on the charger and it didn't charge up at 8+ hours. I also can't turn it on. I've tried to push the buttons for a longer time, but still nothing. Light is red when I'm put it on the charger.
Please follow the troubleshooting steps from our 'Battery and Charging Issues' guide by clicking on the first link. If the issue persists with your JBL Endurance RUN BT, please contact our customer support via the second link for us to check on your options. https://bit.ly/3blwbWY | https://bit.ly/2WocMfi
Date published: 2021-12-11
The headphones were working fine but suddenly today they arent turning on. I have charged them, and the red light works while charging, but they don't turn on after I remove them from the charger. Any help would be appreciated. They are around 5 months ol
We would like to get more information to help you out, please contact us so we can assist you:https://bit.ly/2zwFkYM
Date published: 2021-06-06
I lost the charging cable. Can I use a phone charging cable?
You can charge our JBL Endurance Run BT with your phone's charging cable.
Date published: 2022-03-09
I have bought this BT endurance run before 8 months it was working fine. Suddenly today it is ON and sounds like sorting inside the hear phones and not able to turn off /connect.
We would like to get more information to help you out, please contact us so we can assist you:https://bit.ly/2zwFkYM
Date published: 2021-06-06
No problem when connected to a phone, but on the laptop I can only listen to stereo profile. When I change to headset/hands free, like, on a zoom call, the audio is very distorted. If I select stereo, then I have to use laptop's microphone. Please help
Always get the latest Bluetooth driver version available for your Laptop. To download the correct driver (software), visit the manufacturer's website of your Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support. If you are experiencing issues getting the third-party app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication app's audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. If you need further assistance, please contact Customer Service at https://bit.ly/3o4IpJj
Date published: 2022-03-05
I was running and in the middle of my workout the right earpiece had a static noise and I started to disconnect it to my phone but the static noise is still there. Now the statics gone but the red led light still on everytime and it drains the batt.
We appreciate your feedback on our JBL Endurance Run BT. We saw that you have an existing case with our Customer Support Team. Please reply to the email thread if you need more help. Thanks!
Date published: 2021-06-06
When I turn them off the red light does not turn off it remains on? what would that be? Is there a factory reset or something?
We would like to get more information to help you out, please contact us so we can assist you:https://bit.ly/2zwFkYM
Date published: 2021-06-06
I just used my JBL endurance run, i disconnected my bt from my cellphone and when i tried to turn off the headphones they had a red light on them and couldnt do it. I started charging them but nothing happened. Now i cant turn them off or connect a device
Here are some steps that you can try:
1. Charge the headphones overnight or at least 8 hours.
2. Check if there are any visible damages on the unit.
3. When charging, make sure that the unit is plugged into a working wall
outlet/power strip.
4. Check the charging port for any debris or bent pins.
5.Use a different USB charging cable and adapter, making sure that it's securely plugged into the unit and to the USB adapter/outlet.
6. Use another power adapter/power cord and make sure that it's securely plugged into the unit and power source.
7.Try wiggling or moving the charger around the charging port, see if there's a sweet spot where the speaker would successfully charge.
If you need further assistance, kindly get in touch with our Customer Support Team so we can directly assist you: https://support.jbl.com/us/en/
Date published: 2021-06-06
I got earphone just a while ago. Does not turn on so i charged it and it has been connected to power for more than 3 hours now but the red light is still on. So i disconnected it and tried to turn it on but it does not turn on. What should i do?
We would like to get more information to help you out, please contact us so we can assist you:https://bit.ly/2zwFkYM
Date published: 2021-06-06
What do the beep codes stand for ? Battery below a certain percentage ? Can it be switched off ?
Our JBL Endurance Run BT beeps when the battery is between 5 and 10% charged, and this feature cannot be turned off. To learn more about this product here's the Quick Start Guide link: https://bit.ly/3GmbS8T
Date published: 2022-03-05
I've had these for about a year when listening today one side had sound the other nothing. The set was charged at 90% when I started listening so I don't think it had to dp with battery power. I'm hoping it's not damaged.
We're sorry to hear about what happened. Here are some troubleshooting steps for us to check your JBL Endurance Run BT:
1. Please try using a different music player and check the balance of the music player if you'll hear a sound from both earphones.
2. Try using a different source ex. (phone, tablet) if you'll be able to hear a sound using a different device.
If steps 1-2 didn't work, you can also reset the earphones:
Long press the Volume + and volume - for about 5 seconds.
If the problem persists, please contact our customer support for assistance in checking your options: https://support.jbl.com/us/en/#call
Date published: 2021-06-06
When I do call whilw cycling, the other side will hear background noise more than my voice. The headset is sensing background better than sensing my voice. Is there an issue with the headset noise cancellation?
Our JBL Endurance Run BT does not have a noise cancellation feature. If you need more assistance, please contact our distributor, Harman House in checking your options: Tel: +971 4 8873336 Email: info@harmanme.com / sales@harmanme.com
Date published: 2022-04-16
Impedance (ohms)
The Impedance of our JBL Run BT is 32ohms.
Date published: 2021-06-06
My earphones are only 6 months old. When I switch them on/off they now make 2 tone sound. My phone also can't discover them. When I charge them the red charging light comes on for a few seconds and goes off again. Tried all the steps in your guide.
Thank you for your question.
In order to receive support, could you contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance?
Please see https://uk.harmanaudio.com/support-contact.html#ns for further details.
Thank you.
Date published: 2021-07-29
My JBL Endurance RunBT works okay but the mic isnt recognized anymore. in calls the mobile doesnt use headphones mic so it keep using the built in, when i connect it to my laptop also i dont see mic available at all, all device doesnt see headphones mic.
Hi there, we'd like to work with you directly so we can find out our available options. We noticed you're located in Egypt. Please send an email to your local support at http://www.harmanhouse.com/index.php?route=information/contact
Date published: 2021-11-17
Hey JBL. I have a problem with my JBL ENDURANCE RUN BT EARPHONES. When im turning it ON instead of the usual ON SOUNDS ive heard ENGLISH MODE ON. Now i cant use it and cant pair it with my phone. Do you know how to fix it? Thanks
Thank you for bringing this to our attention. Please follow the troubleshooting steps outlined in our 'Bluetooth Troubleshooting' guide found in this link. https://bit.ly/2LXMoHJ
Date published: 2021-09-16
Hey :) Do the are the JBL ENDURANCE RUN BT 2 EARPHONES recognised on any JBL application?
My JBL Endurance RunBT won't turn on. When I try to turn it on, a sound is played (not the same as the usual "on" sound), but there is no light to confirm that it is on or off as before. I tried a factory reset and it does the same thing. Any help please?
Hi. I bought it to run over the beach, since start was everything fine, now, I can't answer or hang up the call through the "play button" Theres any way to reset the setup?
Support
1/2
2/2