Køb nu
JBL Endurance RUNBT
Send til
,
Betaling
Gemt slutter om
Der er en nyere version af denne vare:
Please click PERSONALIZE to get started or select a design
Fliphook™
Med det fleksible tovejs design kan du bære hovedtelefonerne enten i eller bag ørerne.
Gør aldrig ondt. Falder aldrig ud.
Med TwistLock™- og FlexSoft™-teknologierne er disse hovedtelefoner lette og ergonomiske med sikker pasform, uanset hvordan du træner.
Funktioner
Svedtætte
Udformet til at modstå din mest krævende træning - både inde og ude under alle vejrforhold.
6 timers trådløs afspilning
Med Bluetooth® kan du trådløst afspille musik i høj kvalitet uden at bekymre dig om rodede ledninger, der forstyrrer din træning.
Håndfri opkald
Den integrerede et-knaps-fjernbetjening med mikrofon giver dig håndfri opkald, så du kan fokusere på din træning. Et dobbelttryk på knappen aktiverer Google Now eller Siri.
Magnetiske ørestykker
Magnetiske ørestykker giver nem kabelhåndtering, når hovedtelefonerne ikke er i brug.
Detaljer & Downloads
Item# JBLENDURRUNBTRED
Beskrivelse
Gør aldrig ondt og falder aldrig ud
Resultater er vigtige, og når du har de perfekte hovedtelefoner, kommer intet i vejen for dig og din træning. Med JBL Endurance RUNBT kan du afspille trådløst, så du får motivationen til at træne endnu hårdere med den kraftfulde JBL-lyd. Med deres FlipHook™-design tilpasser de sig i eller bag øret, så du får endnu mere komfort. Den komfortable kombination af FlexSoft™ ørepropper og TwistLock™ teknologi sikrer, at disse ørepropper med garanti aldrig vil gøre ondt eller falde ud. JBL Endurance RUNBT hovedtelefonerne er IPX5-svedtætte, så de følger dig hele vejen, uden at sved eller regn ødelægger din træning. JBL Endurance RUNBT har en afspilningstid på 6 timer og integreret mikrofon og fjernbetjening til håndfri håndtering af lyd og opkald. De magnetiske ørestykker fastgør dine Endurance RUNBT bekvemt omkring halsen, når de ikke er i brug. Nyd din træning!
Specifikationer
- Følsomhed
- 102dB SPL@1kHz/1mW
- Dynamisk frekvensområde
- 20Hz-20kHz
- Maks. SPL
- 15mW
- Impedans
- 16 ohm
Lydspecifikationer
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 102 dB
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 16 ohm
Mål
- Hovedtelefonernes kabel-længde (cm)
- 62
- Hovedtelefonernes kabel-længde (ft)
- 2.03
- Vægt (g)
- 19.7
- Vægt (oz)
- 0.69
Specifikationer, styring og tilslutning
- Bluetooth-profiler
- A2DP V1.2, AVRCP V1.5, HFP V1.5, HSP V1.2
- Bluetooth-frekvens
- 2.402 GHz - 2.48 GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK and 8DPSK
- Bluetooth sender-effekt
- 4dbm
Batteri
- Taletid (timer)
- 6
- Maksimal spilletid (timer)
- 6
Egenskaber
- Understøtter Siri, Google Now
- Ja
- Trådløse
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Genopladeligt batteri
- Ja
- Bluetooth
- Ja
Det er der i æsken?
- 1 ENDURANCE RUNBT
- 3 størrelser ørepropper
- 1 adapter
- 1 opladningskabel
- 1 garanti/advarsel
- 1 x lynguide/sikkerhedsark
Dokumenter og downloads
Bedømmelser og Q&A
Kunde-anmeldelser
Spørgsmål og svar
Are they compatible with a Samsung Galaxy S20 FE?
Our JBL Endurance run should be able to pair and connect with any android phone.
Date published: 2021-06-06
How can I turn off the microphone?
The microphone is off when not in use.
Date published: 2021-06-06
I bought jbl 3ndurance run bt a year back, they have been working fine since then but recently it only connects for calls and not for all the media and i can only hear someone while calling otherwise for other videos it doesnot connect with earphones.
We're sorry to hear about what happened. We're sorry to hear about what happened. Here are some troubleshooting steps for us to check your JBL Endurance Run BT:
1. Please try using different a music or video app if you'll experience the same problem.
2. Try using a different source ex. (phone, tablet) if you'll be able to hear a sound using a different device.
If steps 1-2 didn't work, you can also reset the earphones:
Long press the Volume + and volume - for about 5 seconds.
If you need more help, please contact our local support in India for assistance: https://support.jbl.com/in/en/#call
Date published: 2021-06-06
I had bought this earphone a while ago and all was working fine untill few days back it stopped working I thought it was discharged but then i kept it for charging and red light came on However after 3 hours of charging it still doesnt works
Please follow the troubleshooting steps from our 'Battery and Charging Issues' guide by clicking on the first link. If the issue persists with your JBL Endurance RUN BT, please contact our customer support via the second link for us to check on your options. https://bit.ly/3blwbWY | https://bit.ly/2WocMfi
Date published: 2021-12-11
I bought this device before few days, until now everything is good except that the device unexpectedly disconnects after abt 15' in stby mode, i am using this device only for phone calls and always my iPhone is in close proximity and JBL fully charged.
We appreciate the feedback you've provided to us. Our JBL Endurance Run BT has an auto-shut-off feature that disconnects the device when not in use. This is mainly to save battery power and cannot be disabled. You will need to keep on playing music on your source device if you don't want it to shut off. We're always looking for ways to improve so we'll make sure to submit your feedback to the right department. If you have other questions or concerns, feel free to contact us here: https://bit.ly/36GRyPQ
Date published: 2021-06-06
Battery ma h power
It has 120 mAh. For more information you can check the spec sheet of our JBL Endurance RUN BT using this link: https://bit.ly/2V826ko.
Date published: 2021-06-06
I have had my set of JBL Endurance earphones for a while now and suddenly a few days ago, the battery only started lasting about 3 hours. I definitely charge them fully and I have tried a few different power supplies and it still only lasts for 3hrs.
We would like to get more information to help you out, please contact us so we can assist you: https://bit.ly/346JHYI
Date published: 2021-06-06
how to know battery is full? which colour LED is lighting ? and how to on the ear phone ? is that double tab or long press ?
Our JBL Run BT's LED will turn off when it's fully charged. To turn on the JBL RUN BT, you press the middle button for 2 seconds. You can find these details in our Quick Start Guide: https://bit.ly/34pMTzq
Date published: 2021-06-06
Support
1/2
2/2