Thanks for your question. Yes, it may corrode when it's always exposed to salt water. To prevent this from happening, please always make sure that the charging port is dry after every use.

Our JBL Clip 4 will go on power-saving mode or standby mode after 8-10 minutes of inactivity or doesn't detect usage from the source device.

There's no harm in using our JBL Clip 4 while it is connected to a power source. It will not over charge. Our products have PCM circuits that manage the charging of the battery. However, if you'd like to save energy, you may unplug the speaker.

Yes, you can skip tracks by pressing the play button of the JBL Clip 4 twice.

No, I was hoping for that aswell.

Thank you for your question, unfortunately this is not possible. Except for the clip and go devices almost all other speaker support this function.

You may try to perform a reset on your Clip 4 by following the instructions below: In Power On mode, press and hold 'Volume+' together with 'Play/Pause' for more than 10s. The speaker will power off and is now reset. For any issues or concerns about our products, please get in touch with our customer support service via our official website or toll-free hotline.

Our JBL Clip 4 can't be used underwater as Bluetooth signals can't pass through water. However, it can work even if it's wet but not submerged in water.

Hi There, our Clip 4 is not yet available in the market. You can check out our Flip 4 which can wirelessly connect up to 2 smartphones or tablets at the same time and take turns playing impressive stereo sound. https://www.jbl.com/bluetooth-speakers/JBL+Flip+4.html

Our JBL Clip 4 can't be paired with any other speaker since it has no Connect feature. As Bluetooth technology improves, so do the features and connectivity of our products. 

Please follow the steps for pairing an iPhone with our JBL Clip 4 by following the steps enumerated in our 'Pairing Speaker with iPhone or iPad' guide here at this link. https://bit.ly/3aoJGnU

Our JBL Clip 4 has Bluetooth version 5.1. The range of it while connected to your device can go from 10-15 meters tops, this could vary depending on the environment. Blockages such as walls and other wireless signals like WiFi and Bluetooth devices can also cause interference.

Our JBL Clip 4 won't overcharge as our products have PCM circuits that manage the charging of the battery. It will switch the speaker to AC mode once fully charged.

Hello, Thank you for your question. I am sorry to hear that your Clip 4 turns itself off. I recommend that you try the following, to see if it might offer a solution: Try charging it with another cable. Try charging it with another adaptor. Try charging it through another outlet. ​​​​​​​Leave it on charge for 12 hours. It could also be a good idea to factory reset the speaker, following these steps: 1. Make sure that the speaker is turned ON. 2. Press and hold 'Volume+' together with 'Play/Pause' for more than 10 seconds. 3. The speaker will power OFF and is now reset. 4. Please "forget" the connection to the speaker in your bluetooth settings of your device, and connect it to your device again.  Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://dk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Thanks for your feedback. For our JBL Clip 4, we recommend using a 5V and 1A adapter and the included USB-C cable to charge the speaker. We also recommend always making sure that the unit is charged and not leaving the battery drained for long periods of time, to ensure that the battery health is prolonged.

The LED indicator lights of our JBL Clip 4 will blink when it has a low charge. While it is charging, it will have a solid light and once the battery is full, the LED should turn off.

Our JBL Clip 4 doesn't have a charging port cover. It is IP67-waterproof and dustproof. It protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant to dust. If you have any questions or concerns, please contact our customer support.

Aside from their physical design, here are their differences: Bluetooth version: Clip 3 - 4.1, Clip 4 - 5.1 Output Power: Clip 3 - 3 Watts, Clip 4 - 5 Watts Waterproof: Clip 3 - IPX7, Clip 4 - IP67 Speakerphone: Clip 3 - Yes, Clip 4 - No Distance range and distance are practically the same but the Clip 4 has a more stable and stronger connection. The max distance would be 10-15 meters tops.

Our JBL Clip 4 won't overcharge as our products have PCM circuits that manage the charging of the battery. It will switch the speaker to AC mode once fully charged.

For the JBL Clip 4, You may to use a USB charging adapter with at least 5V and atleast 1A rating to charge the speaker which is common with mobile phone chargers.

Please subscribe to our Newsletter to be updated with our product releases.

Thanks for your inquiry. Our JBL Clip 4 doesn't have a lock on the carabiner. However, it has a fully integrated metal carabiner closure that protects the speaker from damage and allows it to be attached to a backpack or belt loop.

Our JBL Clip 4 is rated IPX67 protecting the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes, but it is also resistant to dust. This speaker is not designed to float on water.

Our JBL Clip 4 is designed to be used for mobile phones, tablets, and laptops. Using it with your TV isn't recommended as it may have audio and video sync issues due to the limitations of Bluetooth technology.

Hi there, we're here to help. Please try to use a different charging cable and adapter to charge your JBL Clip 4. Also, please check the contact terminals for any dirt and debris that may be causing them not to charge, and use a cotton swab to clean the terminals. If you need more help with your device, please contact our customer support service via our official website or toll-free hotline.

Our JBL Clip 4 is IP67 waterproof and dustproof. This means that the unit can be dropped into a body of water up to a meter deep for half an hour. Please make sure that the unit is dry or free from moisture before charging.

Thanks for reaching out. Our JBL Clip 4's carabiner is made of aluminum alloy (non-rated for climbing, i.e., not to be used as a rock-climbing carabiner) and silicone plastic for that translucent joint.

Hello, Unfortunately we do not offer support in Danish, but we will gladly reply to you in English. Thank you for your question. It is unfortunately not possible to connect two Clip 4 speakers together.  Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://dk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Thanks for your inquiries. Our JBL Clip 4 does not have a multi-point feature.

Our JBL Clip 4 can't be paired with any other speaker since it has no Partyboost feature like our JBL Clip 4. Only speakers that have the same Partyboost feature can be linked with each other. Here are some of our speakers that have the same Partyboost feature: JBL Flip 5 JBL Charge 5 JBL Pulse 4 JBL Boombox 2